luxury stainless steel paper box roll holder bathroom accessorie

by hardware-online-stores.com

Price:98.0260
Type: Paper Holders Material: Stainless Steel
Model Number: F1002 material: Stainless Steel




Instructions & Installations
1.Tools Needed   Electric drill 6mm (or other sizes depending on the screw being used) diamond  cross"+" and flat"-" screw drivers, a pencil,and an eye-guard face shield. 2.Preparation   The screws and anchors supped should only be apped to a sod wall, in case it is a hollow wall, please select and buy your own fittings apply. 3.Selection or installation location  (1)Select a suitable place on a sod wall  (2)Always make sure there is no pipe or wire in the wall.  WARNING: DRILLING INTO PIPE OR WIRE IN THE WALL CAN CAUSE SERIOUS DAMAGE TO YOUR BODY OR PROPERTIES  (3)Drill holes at clearance between tiles, wherever possible.  (4)If the user decide to drill into surface instead, please do it with a proper aiguille and set the anchor in the back of tile to avoid tile break, it will be the user's owm risk to drill into the tile surface. 4.Installation(for sod wall only)  (1)Wear eye-guard or face shield.  (2)Mark the position to be drilled with a pencil.  (3)Select and lock suitable to the electric drill.  (4)Drill a hole at the position marked in procedure 2  (5)Put the anchor to the holes.  (6)Screw in bracket with a suitable screw driver. 5.Cleaning   Only clean and dry the surface with mild-cleaner and soft-cloth. Do not use chemical detergent or rough sponge. It is recommended to clean the surface periodically for  surface. 6.Weight  600g   Product display

---